Gasket for Tecumseh Engine Crankcase 37342 - Original Part

The Tecumseh 37342 gasket is an original part designed to ensure the seal between the cover and the engine case on Tecumseh engines. It features a silicone application on one side, which enhances its effectiveness by preventing oil leaks. Made from high-quality paper, this gasket guarantees optimal performance for the proper functioning of your engine.

Main Features:

• Compatibility: suitable for Tecumseh engines of 8HP, 10HP, and 12HP. May fit other models equipped with Tecumseh engines.
• Compatible Models:
  • HM Series: HM-70, HM-80, HM-100
  • HMSK Series: HMSK-80, HMSK-85, HMSK-90, HMSK-100, HMSK-105, HMSK-110
  • LH Series: LH-318SA, OH-318SA
  • OHSK Series: OHSK-80, OHSK-90, OHSK-100, OHSK-110
• Performance: prevents oil leaks thanks to the silicone application.

Replacement:

The Tecumseh 37342 gasket replaces the following references: 35362, 35262A, 33253A, ensuring better sealing and reliable engine operation.

Installation Tips:

• When removing the old gasket, it may be stuck. Use a blade or scraper to gently remove the gasket. You can also use a gasket remover product to facilitate the removal.
• Before installing the new gasket, thoroughly clean the contact surfaces to remove any old grease or oil.
• Apply the gasket to the cover ensuring it is properly positioned.
• Use Loctite 242 (blue), which should be applied to the mounting screws of the cover after installing this new gasket. Tighten the screws to a torque of 115 to 120 inch-pounds (or 9.6 to 10.0 foot-pounds). This will ensure a proper seal for this gasket.
• Check the sealing after installation to ensure there are no leaks.

Additional Information:

We are here to help you find the right part number for your engine. Feel free to contact us if you have any questions about compatibility or choosing parts.